Granite Poultice – 10 lb

Granite poultice, 10 lb – the contractor size tub, for granite floors, whole kitchens and anyone who deals with stone staining for a living.

Remove stains and discoloration from granite with 10 pound size Granite Poultice. It restores the original color and clarity to granite countertops and islands.

Product Facts

Your finest hotels, professional cleaning companies, builders, general contractors, granite fabricators and installers, use Granite Poultice routinely, to remove deep embedded stains and discoloration from kitchen granite countertops and islands.

Granite Poultice is quick and easy to use; restoring the original color and clarity to granite countertops and islands usually takes 24 hours to accomplish, depending upon the age, depth, and severity of the granite’s discoloration and staining.

DIRECTIONS: Mix the granite poultice with lacquer thinner (approximately 1 teaspoon of lacquer thinner per pound of granite poultice) to the consistency of cookie dough (lacquer thinner can be purchased at hardware and paint stores). Next, use a rubber, wood, silicone, or plastic spatula, to spread the granite poultice over the discolored/stained granite surface to a thickness ranging between 1/8 to ¼ inch (similar to a pancakes thickness). Next, cover the granite poultice with a plastic wrap or plastic sheeting applied to the granite surface with duct tape; making the granite poultice (airtight) allows the granite poultice to maximize its penetration into the granite pores and pull out grease and oil, plus food and beverages that have stained and discolored the granite surface. Keep the granite poultice in place for a minimum of 24 hours, to do its work; for extremely discolored/stained granite areas it may be necessary to keep the granite poultice in place for 2 or 3 additional days; and sometimes, a 2nd granite poultice application is necessary. Next, after removing and discarding the granite poultice, it is quite common for the granite countertop and island to appear darker than normal, this is because moisture from the granite poultice has not fully evaporated out of the granite’s pores; it usually takes a few days for the evaporation process, and the granite’s normal color, clarity, and gloss will be fully restored. After removing and discarding the granite poultice, use our granite cleaner NeutraSheen For Granite to clean the restored granite area, then seal this granite area with our granite sealer Granite Guard Protector SB, then polish this granite area, with our granite polish Granite Polish and Protector.

PLEASE NOTE:  Granite Poultice is custom made for each order, it has a shelf life of approximately one month, due to one of its main ingredients.

Economical to use, 1 pound of Granite Poultice will restore between 1 and 2 square feet of granite.

How a granite poultice 10 lb draws a stain back out

Scrubbing will never remove a stain that has soaked into stone, because the stain is not on the surface – it is down inside the pore structure. A poultice works in the opposite direction. Mixed into a paste and spread over the mark, it is covered and left alone. As the paste slowly dries it pulls moisture up out of the stone, and the dissolved stain travels with it. Scrape the dried poultice away and the stain comes with it. The Natural Stone Institute describes the same drawing out principle in its consumer stone care guidance.

Who buys the granite poultice 10 lb size

The 1, 3 and 5 pound tubs cover household jobs from a single stain up to a marked kitchen. The granite poultice 10 lb tub is the contractor size. It is what you want for granite floors, for commercial kitchens and bar tops, for restoration work where you are treating many areas across a building, or for a stubborn old stain you expect to attack over four or five applications.

Buying at this size also changes the economics. Poulticing is a slow process by nature, and running out of material halfway through a floor means the job stops until more arrives.

What a granite poultice 10 lb will and will not lift

It is at its best on organic and oil based staining: cooking oil, grease, coffee, tea, wine, fruit juice and the dark rings left by a bottle or a pan. It works on granite countertops, islands, backsplashes and floors.

What it will not do is repair physical damage. A dull patch is not a stain, and neither is a chip or a scratch. If the mark is dull rather than discolored, that is etching or wear, and it needs polishing instead.

Getting the best from a granite poultice 10 lb

Patience is the whole method. Give the paste its full dwell time and resist lifting the cover early, because the drawing action only happens as it dries. Deep or old stains commonly need a second application and sometimes a third.

Afterwards, clean the area with a pH neutral stone cleaner such as NeutraSheen for Granite, let the stone dry completely, then seal it with a penetrating granite sealer so the next spill does not soak in. Sealing is the step that stops you reaching for the granite poultice 10 lb again.

Granite poultice 10 lb questions we get asked

How many applications will I need? Light stains often come out in one. Old, deep or oily marks commonly take two or three.

Can I use it on marble? This is formulated for granite. We make a separate poultice for marble and other soft stone.

Will it damage the polish? Used as directed it draws the stain out without abrading the surface.

Is the 10 lb size overkill for a home? For one stain, yes – start with the 1 lb tub. For a granite floor, it is the sensible buy.