Marble Gloss Restorer SF Marble Polish 16 oz.

Gloss restorer sf 16oz – our special formula marble polish, sized for a full kitchen or multiple bathrooms, for marble species that will not take a gloss with a standard polish.

Marble Gloss Restorer SF (special formula) is a marble polishing and restoration product that will bring back that brand new look to vanity tops, counter tops, bar tops, table tops, floors, walls, showers, and other marble surfaces.

Product Facts

Now you can polish and renew your marble with this professional grade special formula.

The finest 5-star hotels and professional marble cleaning companies use Marble Gloss Restorer SF (special formula) to polish and restore all polished marble, limestone, and travertine surfaces.

When polishing the following marble types:

• pure white (Thassos)
• dark brown (Breccia Nouvella)
• dark green (Verde Antique)
• absolute black – contains no veining, especially no white veining (Belgium Black)

The mineral makeup of these marbles require a different chemistry to produce a high gloss finish, which is found in our Marble Gloss Restorer SF.

Marble Gloss Restorer SF is a proprietary blend of marble polishing powders and compounds which will renew the look of your marble surfaces.

Watch those food and beverage stains, water spots, dull and worn traffic areas, disappear; while the true color and brilliance of the stone is regenerated.

Marble Gloss Restorer SF is quick and easy to use, in bringing back the original color and shine on vanity tops, counter tops, bar tops, table tops, floors, walls, and showers. Not to be used on granite; use our Granite Polish and Protector on granite instead.

DIRECTIONS: Depending on application (e.g. floor buffer or hand-held buffing machine,) when polishing marble with our Marble Gloss Restorer SF, you first make a slurry by mixing the marble restorer compound with water. Distribute the slurry over the area of marble to be polished and place buffer with our Ultimate Polishing Pad over slurry and work in a side to side motion between 200 and 2000 RPM for a few minutes.

During the marble restoration process, it is normal for the slurry to dry quickly and you will notice a grabbing sensation from the machine which is caused by the friction created from using the Marble Gloss Restorer SF; do not add more water, polish this area dry for another minute or two; then, repeat this identical polishing process by adding more Marble Gloss Restorer SF mixed with water and polish the same area of marble one or two more times, before you start polishing your next section of marble.

Be sure to use our Marble Polish and Protector, to enhance and protect the natural beauty of the stone, after using Marble Gloss Restorer SF. Also be sure to check out our original marble restorer product, Marble Gloss Restorer.

Economical to use, 16 ounces of Marble Gloss Restorer SF will polish up to 160 square feet of marble.

What gloss restorer sf 16oz is fixing

Most marble takes a standard polish without issue, but a handful of species – dense, low-porosity stones like Thassos white, Breccia Nouvella, Verde Antique, and Belgium Black – resist standard polishing compounds and stay dull or streaky no matter how much elbow grease goes in. Gloss restorer sf 16oz uses a special formula chemistry built specifically for these harder-to-polish species, so the shine actually takes instead of buffing out unevenly.

Why the 16 oz size

At 16 oz, this size covers a full kitchen countertop or several bathroom vanities across multiple applications – enough to get a large area through its first restoration and several maintenance passes afterward.

Applying gloss restorer sf 16oz

Clean the surface fully first so grit doesn’t scratch the stone during polishing. Apply in small sections with a soft cloth or buffing pad, working it in with steady pressure, then buff to a shine with a clean microfiber towel. On the harder species this formula targets, a little extra working time pays off compared to rushing the pass.

Keeping the shine

Stick to pH-neutral, marble-safe cleaners for daily wiping – acidic cleaners etch marble and will undo a fresh polish quickly. Wipe up spills right away, especially anything acidic, and reapply a light polish every few months to keep the gloss consistent.

Gloss restorer sf 16oz questions we get asked

How do I know if my marble needs the SF formula? If a standard polish has left the surface streaky or still dull, especially on darker or more unusual stone species, the special formula is worth trying.

Does this replace sealing? No – polishing restores shine, while a dedicated sealer protects against future staining. Both matter for long-term care.

Will it work on all marble types? Yes – the special formula is safe on standard marble too, it simply performs better on the species that resist standard polish.

For an independent explanation of stone care fundamentals, the Natural Stone Institute’s care guide is a good outside reference.