Marble Gloss Restorer SF Marble Polish – 8 oz.

Marble polish SF in the 8 ounce size – the special formula for the four marble species that will not take a high gloss with standard chemistry.

Marble Gloss Restorer SF (special formula) is a pro’s choice marble polishing product that will bring back that brand new look to marble countertops, bar tops, vanity tops, tabletops, floors, walls, showers, and other marble surfaces.

Product Facts

Now you can polish your marble like a Pro with this special formula.

The finest 5-star hotels and professional marble cleaning companies use Marble Gloss Restorer SF (special formula) to polish and restore polished marble, limestone, and travertine.

When polishing the following marble types:

• pure white (Thassos)
• dark brown (Breccia Nouvella)
• dark green (Verde Antique)
• absolute black – contains no veining, especially no white veining (Belgium Black)

The mineral makeup of these marbles require a different chemistry to produce a high gloss finish, which is found in our Marble Gloss Restorer SF.

Marble Gloss Restorer SF is a proprietary blend of marble polishing powders and compounds which will renew the look of your marble surfaces.

Watch those food and beverage stains, water spots, dull and worn traffic areas, disappear; while the true color and brilliance of the stone is regenerated.

Marble Gloss Restorer SF is quick and easy to use, in bringing back the original color and shine on vanity tops, counter tops, bar tops, table tops, floors, walls, and showers. Not to be used on granite; use our Granite Polish and Protector on granite instead.

DIRECTIONS: Depending on application (e.g. floor buffer or hand-held buffing machine,) when polishing marble with our Marble Gloss Restorer SF, you first make a slurry by mixing the marble restorer compound with water. Distribute the slurry over the area of marble to be polished and place buffer with our Ultimate Polishing Pad over slurry and work in a side to side motion between 200 and 2000 RPM for a few minutes.

During the marble restoration process, it is normal for the slurry to dry quickly and you will notice a grabbing sensation from the machine which is caused by the friction created from using the Marble Gloss Restorer SF; do not add more water, polish this area dry for another minute or two; then, repeat this identical polishing process by adding more Marble Gloss Restorer SF mixed with water and polish the same area of marble one or two more times, before you start polishing your next section of marble.

Be sure to use our Marble Polish and Protector, to enhance and protect the natural beauty of the stone, after using Marble Gloss Restorer SF. Also be sure to check out our original marble restorer product, Marble Gloss Restorer.

Economical to use, 8 ounces of Marble Gloss Restorer SF will polish up to 80 square feet of marble.

What a marble polish sf is actually repairing

A dull patch on polished marble is almost never dirt. Marble is calcium carbonate, and anything acidic – wine, citrus, cola, tomato, vinegar, even some household cleaners – physically eats a microscopically rough crater into the polished surface. Light scatters off that roughness instead of reflecting, and you see a cloudy ring. Nothing is sitting on top, which is why scrubbing achieves nothing and why people spend years buying cleaners that were never going to help. The Natural Stone Institute describes the same mechanism in its consumer stone care guidance.

A marble polish sf works mechanically instead. Buffed as a slurry under a polishing pad, it re-flattens the damaged layer until the surface reflects evenly again. Because you have re-polished the stone rather than coated it, the result lasts until something etches it afresh.

Which marbles need the SF formula

Four species will not take a high gloss with standard chemistry: pure white (Thassos), dark brown (Breccia Nouvella), dark green (Verde Antique) and absolute black (Belgium Black). The mineral makeup of those stones needs a different approach, and that is exactly what a marble polish sf provides.

This matters because using the standard product on one of those four is the most common reason someone concludes that marble polishing does not work at all. If your stone is one of them, this is the product you need. If it is not, our standard Marble Gloss Restorer does the job and costs less.

Is the 8 ounce marble polish SF the right size?

The 8 ounce jar is the working size. It suits a bathroom vanity, a kitchen counter run, a fireplace surround, or a handful of etch marks across several surfaces, with enough material to go round twice where the damage is worst. The 4 ounce jar is the better buy if you only want to test the process on one small area first.

Getting a good result with a marble polish sf

Clean and dry the surface first, so you are polishing stone rather than grinding grit into it. Mix the compound with a little water to a slurry, keep it wet the whole way through, and work in a steady side to side motion. A slurry that dries out stops cutting and starts smearing, which is the usual cause of an uneven pass. Rinse thoroughly with clean water afterwards.

Expect badly etched areas to need a second round – that is normal rather than a sign something is wrong. Finish with Marble Polish and Protector so the restored shine resists the next spill, and clean routinely with NeutraSheen for Marble rather than a general purpose spray.

Marble polish SF questions we get asked

Do I need a machine? A rotary buffer is fastest, but customers regularly report good results by hand with a hog’s hair pad and some patience.

How do I know if my marble needs SF? If it is pure white, dark brown, dark green or absolute black, it does. Most other polished marble does not.

Will it work on granite? No. Granite needs different chemistry – use our Granite Polish and Protector.

How long does the result last? It is a genuine re-polish rather than a coating, so it lasts until the surface is etched again.